LINK Up!! Stage 2.

So the loom is done for the Link, and ive got a dizzy to suit.
With 24/1 tooth rotors inside.

So this My wiring diagram i used.
Took a bit to figure out what goes where.

But after all that, im still failing to get spark..

So not running yet. :(

ITB's ....

So ITB's...

Could be a happening thing, scored some BT 20v ITB's, just have to make an adapter.
Im thinking of laser cutting some flanges up, then bending some pipe and welding it up.

Hopefully Something like this.!

Catch-Can

So a while back i purchased a Catch-Can off Ebay, and it finally turned up.

Was a very cheap unit, but turned out to be pretty decent.!
Check here to get yourself one!
Ebay Link

Nothing speaks better than Photos!!

LINK Up!!

So i have stumbled across a Link G1...

A while back i was notified that someone might have one, and he has finally parted with it, and it has ended up in my hands..
With a SUB24NEW chip inside, it should run the Beast just fine.!!


So to kick things off im thinking of making an adapter cable from the factory plugs and wiring to the Links plug.
To do this im going to use a standard ECU and unsolder the plugs from inside and then run the appropriate wires to the Link plug..

Standard 4age ECU Pinout

Link 17 Pin Plug

This should be fun!!

A rare piece of JDM..

So not a huge amount has happened lately, still waiting on the Link to arrive, and might be looking at getting some larger cams to go with it.

But what has happened is this..

A Genuine Nardi Steering wheel.

For a long time know ive had this wheel on my go-kart, but never thought anything of it. Until i found a photo of a Ae86 with the same wheel on it..

So i went a ripped the wheel off the kart and gave it a clean. (It has been out in the weather for around 4 years..)
The leather is a little worn, so i lathered it in beas wax to give it a new lease of life.