POWER.!!

So Went on the DYNO again Friday afternoon, did a basic run to check the fuelling. Ended up having to bump it up quite abit as it was running lean.
Then came the power run.

1st power run showed more torque that before but similar power..
So i went and changed the cam timing a bit. We advanced the inlet as far as it would go.

2nd power run showed a 5kw increase over the whole bored!

It has a real nice curve to it, with no major dips, so is very responsive.

A total of 90kw at.the.wheel / 111kw at.the.flywheel
Which im pretty happy with!!

But in saying that, im going to rotate the cam a tooth on the cambelt and see if advancing it anymore will give it any more power...!

So stay tuned..!