Project Low.

So for a while now i have been looking at the Rolla, wanting it to sit a little lower.
The rear just sits a little to high for my liking..

So i did some Photo-shopping and got it to look like this.. "Dream Lab"
But i dont think this is going to be very achievable, unless.... I go a and add Air-Bags into the mix.. Hm..

But the issue is having funds to go out and buy some Adjustable suspension..Or air bags..

So i decided to make my own..

For the Fronts i removed the Shock inserts from the casings, and then grinded off the spring seat marking where it was. And then measuring and marking down 20mm from the original position and re-welding it back into place.

And then for the Rears i took apart the top hats, and flipped the internal piece that sits on the top of the shock. So this means the shock sits further through the top hat, thus lowering it a little..